Subscribe by RSS
What data recovery tools to buy if you want to start a data recovery business?
Free video data recovery training on how to recover lost data from different hard drives?
Where to buy head and platter replacement tools at good prices?
Data recover case studies step by step guide
I want to attend professional data recovery training courses
We have been told many times by our clean room data recovery engineers they have low success rate on drives with stuck motor and they cannot do much on these difficult cases until they begin to use the spindle replacement tool.
When we received damaged hard drives with stuck or jammed motors, we usually consider using some kind of hdd repair hardware to disassemble the hard drives, remove the heads carefully and then remove the platters of the patient drives to a donor hard drive. Well, this is not easy data recovery work especially when there’re multiple platters of over 2 with dumpers between the platters.
We know there’re some data recovery tools manufacturers claiming to be able to swap multiple platters with dumpers but few of them can do it with good result and even some of them caused second damage or permanent loss to our customers’ data which disappointed and annoyed us a lot. There’s one data recovery tools supplier declared their one-by-one platter exchange for jammed-motor drives with dumpers but it seems only their own clean room data recovery engineers are able to use that data recovery technology successfully but none of the rest. Maybe a thousand times’ try will make it.
So what to do to increase our data recovery success rate while the traditional data recovery technology for jammed-motor drives failed?
Thanks to HDDsurgery, we got the spindle replacement tool. It’s innovatively changing the way of clean room data recovery. It’s to replace the jammed spindle instead of head and platter replacement which will be kept in place and alignment for successful data recovery. However, this tool is working so far for a limited drive families: Seagate 7200.11 and 7200.10 and support the following drive models:
SATA
ST3750330AS
ST3750630AS
ST3640323AS
ST3500620AS
ST3500820AS
ST3500830AS
ST3400620AS
ST3400820AS
ST3320620AS
ST3320820AS
ST3300620AS
ST3300820AS
ST3250620AS
ST3250820AS
ST3200820AS
ST32000542AS
ST32000641AS
ST3750640AS
ST3750840AS
ST31500341AS
ES.2 SATA
ST3750330NS
ST3500320NS
ES.2 SAS
ST31000640SS
ST3750630SS
PATA
ST3500630A
ST3500830A
ST3400620A
ST3400820A
ST3320620A
ST3320820A
ST3300620A
ST3300820A
ST3250820A
ST3200820A
ST3750640A
ST3750840A
ES SATA
ST3500630NS
ST3320620NS
ST3250620NS
ST3500830NS
ST3400620NS
ST3400820NS
ST3320820NS
ST3250820NS
ST3750640NS
ST3750840NS
Price: Euro2500, so you see the price is not cheap, we suggest this one for very serious data recovery business who have long plans and ambitions in data recovery or computer forensic field. Maybe it’s more necessary for law enforcement and other computer forensic labs because they cannot afford to even a small mistake during their data recovery job.
If you need better prices or detailed purchase terms on this innovative clean room data recovery equipment, please email to info@datarecoverytools.co.uk. As always before, Data Recovery Salon welcomes any suggestions and fresh ideas on all about data recovery.
1 Comment
Unfortunately, at times the alignment is damaged already at the time where the bearing seize.
Minimal differences in the friction of the platter assembly may cause one platter to slip microscopic in relation to the other(s).
The platters stop from 7200 rpm to nil in perhaps a quarter of a turn.. that is some heavy inerty to fight in the platters fitting.
So what is really needed for those cases is a system of automatic determination of the allignment point and then HD by HD and platter by platter imaging. Solve that task and become a millionaire.
JMHO
[…] data recovery – Google Blog Search « Recover Deleted Files Windows 2000 – Data Recovery Virus … Data Recovery […]